One Park Drive, Wood Wharf

PERI Products

Explore our extensive range of products and systems to find the right option for your project

PERI products are designed to integrate across our entire range.  Formwork, scaffolding, construction accessories, shoring, infrastructure products and plywood working together to solve your problems on site.  View our full range below.

All Products

Use the filter function below to find the product you're looking for and its application.
VT 20
Formwork carriage used on the steel substructure for the construction of carriageway slabs
The lightweight for new construction and refurbishment projects
The system consists of different types of load and length optimized frames, which enable to continuously create every span with the corresponding combination.
Shoring system for very large loads in bridge constructions as well as for special applications in industrial construction
The movable, anchor-free solutions for bridge infrastructure. Perfect for bridges over 150m long.
The fast, rentable solution with the best handling and reduced material quantities
The mobile solution installed below for bridges over 150 m long
Scaffold-free cantilever formwork for steel composite and precast concrete bridges
You can analyse the data collected from the sensors and submitted to the cloud in real-time from anywhere.
The PERI InSite Pressure Sensor was used on the Regent Street Flyover project in Leeds.
The PERI InSite Temperature sensor installation
TRIO is a universal formwork system which places the highest emphasis on uncomplicated forming operations and the reduction of shuttering times.<br/>
MAXIMO provides time-saving forming with MX tie technology as well as the best concrete finishes for wall formwork.<br/>
The universal lightweight formwork for walls, columns and slabs
Lightweight wall formwork with cleverly designed corner solution<br/>
Reliable concreting of single-sided walls up to 8.75 m high<br/>
Economical forming without ties, for all radii, also with special formwork<br/>
The drive rails are available in two variants, depending on the type of project at hand: RCS MAX C and CL. Both allow the platforms to be moved safely in 750 mm increments.
Flexible girder wall formwork, also for high-grade architectural concrete surfaces.<br/>
The lightweight and proven aluminium panel slab formwork with short shuttering times.
The choice of girder is based on project- specifi c requirements: the GT 24 Lattice Girder allows large spans and thus reduces the number of parts to be moved. The VT 20K Solid Web Girder is the cost-effective solution for smaller slab thicknesses.<br/>
Easy and simple moving of slab tables
All heights, all cross-sections, regardless whether square or rectangular-shaped<br/>
All heights, all cross-sections, regardless whether square or rectangular-shaped
PERI RCS climbing combines the advantages of different systems in a modular system that makes the easy adaptation to site-specific requirements possible.<br/>
With PERI SCS, the loads from the fresh concrete pressure are transferred without formwork ties through the brackets into the climbing anchors of the previous concreting section.<br/>
The Self-Climbing System ACS-R with the one-sided reinforcement scaffold in advance.
The CB climbing system provides safe working conditions with wall formwork at all heights.<br/>
HR Render image of the PERI VTC Tunnel Carriage
Supporting structures cost-effectively erected with system – with materials and expertise from a single source
Either the Heavy-Duty Tower as the Truss Girder are adjustable to the correct height and length.
Construction of superstructures using the balanced cantilever method – fast and dimensionally-accurate
A safe and clean solution for short bridges and redevelopment.
The formwork carriage, which consists of rentable standard material, is optimally adapted to the geometrical and static boundary conditions and therefore provides a very cost-effective solution.
3D Formwork Units: Precision-made for an individual design
The DK and SK tie systems serve to ensure subsequent, reliable sealing of tie points.
The cost-effective solid web girder
A complete programme, can be telescoped to reach a length of 14.00 m
The versatile lattice girder with high load-bearing capacity.
The MXK Bracket System provides high level of safety whilst requiring little installation effort. The lightweight system components are manually-assembled on the ground.
With the ISC SONO WZ Analyser, the water content of fresh concrete can be quickly and precisely determined on site.
Used as a cost-saving lightweight individual prop and cost-effective shoring tower<br/>
Extremely flexible work scaffold for a wide range of applications.<br/>
Extremely adaptable and with a high load-bearing capacity
The lightweight stair tower for flexible access solutions
For high requirements regarding load bearing capacity and accessibility.
The suspended scaffold can be manoeuvred with little effort due to smooth plastic rollers.
Modular Reinforcement Scaffold for efficient work.<br/>
For wide-span working platforms and temporary pedestrian footbridges
LGS standard components are the basis for variable roof shapes.
The cost-effective shoring for slab tables and high loads<br/>
The maximum level of flexibility in shoring solutions Shoring Systems
The efficient shoring system with few system parts<br/>
The heavy-duty prop with integrated load control<br/>HD
The tubular steel prop for daily use on construction sites
The galvanized tubular steel slab prop from PERI with up to 50 kN load-bearing capacity
Stable and flexibe shoring system with high load-bearing capacity
The Modular 1,000kN System
Concrete release agent for all formwork and equipment
Elliotis Pine is a plywood for universal applications.<br/>
Ultraform
Tulsaform
Wisaform MDO
The low-price film-coated imported plywood for formwork applications.<br/>
Filmfaced plywood for smooth fairfaced concrete surfaces.<br/>
The large-size formwork panel for almost joint-free fairfaced concrete finishes.
The traditional formwork panel made of three layers
The Chilean plywood is ground on both sides and it is very inherently stable
Oriented Strand Board for use in multiple structural applications<br/>
Medium Density Fibreboard (MDF) is an engineered wood-based sheet material made by bonding together wood fibres with a synthetic resin adhesive.
With their excellent properties the PERI Pave production pallets are a reliable component of international manufacturing of concrete blocks.
Visualization plays an increasing role in all stages of the construction process. The communication, safety and efficiency of many processes benefit from detailed virtual models.
Plan your build easily.
The CAD program for professional work preparation
The Formwork Load Calculator is available as web in German and English.
The MULTIFLEX Girder Slab Formwork Configurator is available as web app in German and English.
The ST 100 Stacking Tower Configurator is available as web app in German and English.
VGK Design Tool
BIM Software Image
General overhaul for your formwork
The easy to handle shoring construction kit for truss girders, shoring towers and pedestrian bridges